FY18DPC-E2

Product function: gear speed measurement
Installation method: embedded
Detection distance: 2 mm
Ensure distance: 0…1.6 mm
Standard target: Fe 18*18*1t
Output method: PNP

 

Technical Parameters
Dimensions
Connection Diagram
Product Features Gear speed measurement
Installation method Buried
Detection distance 2mm
Ensure distance 0…1.6mm
Standard target Fe 18*18*1t
Output method PNP
Output status NC
Residual voltage ≤2.5V
Power supply voltage 10…30VDC
Load current ≤200mA
Consumption of current ≤10mA
Switching frequency 25000Hz
Switch point offset ≤±10%
Hysteresis range 1…15%
Repeat error ≤3%
Ambient temperature -25℃…70℃
Ambient humidity 35-95%RH
Protection circuit Short circuit protection, overload protection, reverse polarity protection
Impact pressure resistance 1000V/AC 50/60Hz 60s
Insulation impedance ≥50M Oh (500VDC)
Vibration resistance Complex amplitude 1.5 mm 10…50Hz(X,Y,Z Directions 2 hours each )
Protection level IP 67
Output Instructions yellow LED
Housing material Nickel-Copper Alloy
Product Certification CE
Connection method M12 Connector
 

Prev :
No Data
FY18DPO-E2
: Next